1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. ZPL Network Commands
  4. ^NN
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^NN

^NN

Use this command to set the Simple Network Management Protocol (SNMP) parameters.

Set SNMP

Format:
^NNa,b,c,d,e,f
Parameters
Details
a
 = system name
Same as printer name.
Values:
Up to 17 alphanumeric characters
b
 = system contact
Any contact information as desired (such as a name or phrase)
Values:
Up to 50 alphanumeric characters
c
 = system location
The printer’s model information.
Values:
Up to 50 alphanumeric characters
d
 = get community name
Values:
Up to 19 alphanumeric characters
Default:
public
e =
set community name
Values:
Up to 19 alphanumeric characters
Default:
public
f
 = trap community name
Values:
Up to 20 alphanumeric characters
Default:
public