1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. ZPL Commands
  4. ^XA
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^XA

^XA

The
^XA
 command is used at the beginning of ZPL II code. It is the opening bracket and indicates the start of a new label format. This command is substituted with a single ASCII control character STX (control-B, hexadecimal 02).

Start Format

Format:
^XA
Comments:
 Valid ZPL II format requires that label formats should start with the
^XA
 command and end with the
^XZ
 command.