1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. SGD Printer Commands
  4. zpl.label_orientation
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
zpl.label_orientation

zpl.label_orientation

This command instructs the printer to rotate the entire label output by 0, 90, 180, or 270 degrees.
If this command is set to 180,
print.invert_label
 is enabled, and
^POI
 is used. The outcome results in an inverted label orientation (because it is triple inverting).

Setvar

To assign the value of the label orientation:
! U1 setvar "zpl.label_orientation" "value"
Values
"0"
,
"90"
,
"180"
,
"270"
Default
"0"

Getvar

To retrieve the value of the label orientation:
! U1 getvar "zpl.label_orientation"
Example
This
setvar
 example shows the value set to
"90"
. 
! U1 setvar "zpl.label_orientation" "90"