1. Zebra Aurora Focus User Guide
  2. Connectivity Gateway Solutions
  3. Configuring Follower Devices
  4. Serial Triggering
  • Zebra Aurora Focus User Guide
Serial Triggering

Serial Triggering

Set up a Serial Trigger from the host to the Connectivity Gateway.
There is no serial connection between the leader and the follower devices; triggering between the devices occurs over TCP/IP.
  1. Navigate to the
    Configuration
     screen using the left menu on the Home screen.
    serial triggering configuration
  2. Locate the
    Serial
     section and click
    Config
     to set the serial settings for the device.
    configure serial trigger output
  3. Configure the form fields and click
    Confirm
     to enable the settings on the device.