1. MP72 Scanner Scale Integrator Guide
  2. Scale Calibration
  3. Calibration Mode Exit Conditions
  • MP72 Scanner Scale Integrator Guide
Calibration Mode Exit Conditions

Calibration Mode Exit Conditions

This section lists the conditions under which Calibration Mode exits.
  • No response is received from an external operator for 30 seconds. This timeout does not apply at Calibration Success or Failure.
  • The operator shuts off the MP72.
  • Calibration at LOAD completes successfully or unsuccessfully (fails).
  • The user scans Scale Reset, which runs a test in which the optional Scale Display displays a series of characters (see Cold reset of scale in LED and Beeper Sequences). When the test completes, the scale returns to its prior state before entering a scale Calibration Mode. Refer to the MP72 Scanner Scale Barcode Programming Guide.