MP72 Scanner Scale Integrator Guide

Configuring the RS-232 Device Port

To configure the device port:

Power off the MP72 (disconnect the power cable).

Disconnect all RS-232 devices (scanner, Sensormatic, and/or dual cable scale).

Power on the MP72 (reconnect the power cable).

Scan the appropriate RS-232 Device Port Configuration barcode to select the devices and ports to attach to the MP72.

Power off the MP72.

Connect the appropriate devices.

Ensure the devices connected to the MP72 correctly match the device port configuration option selected. For example, if option 1 is selected, ensure a dual cable scale is connected to the Aux 1 port and an RS-232 scanner is connected to the Aux 2 port. Powering on the MP72 with connected devices that do not match the selected option can result in communication failures.

Power on the MP72.

Device Specific Default Values (Inherited Defaults)
Device	Baud	Data Bits	Stop Bits	Parity
Scanner	9600	8	1	None
Sensormatic	9600	8	1	None
Dual Cable Scale: SASI Protocol	9600	7	1	Even
Dual Cable Scale: DIGI Protocol	9600	7	2	Even
Dual Cable Scale: ICL Protocol	9600	7	1	Even
Third Party Scale	NA	NA	NA	NA

Available configurations/options are:

*0 = Aux 1 Sensormatic, and Aux 2 Scanner

1 = Aux 1 Dual Cable Scale and Aux 2 Scanner

2 = Aux 1 Sensormatic, and Aux 2 Dual Cable Scale

4 = Aux 1 Third Party Scale, Aux 2 Sensormatic

5 = Aux 1 Sensormatic, and Aux 2 Disabled

6 = Aux 1 Dual Cable Scale, and Aux 2 Disabled

7 = Aux 1 Third Party Scale, and Aux 2 Disabled

8 = Aux 1 Disabled, and Aux 2 Scanner

9 = Aux 1 Disabled, and Aux 2 Dual Cable Scale

10= Aux 1 Disabled, and Aux 2 Sensormatic

11= Aux 1 Disabled, and Aux 2 Disabled

Third Party Scale configurations only function on Zebra Bioptic systems sold without a scale (model numbers starting with MP7200-). Zebra Bioptic systems sold with a scale (model numbers starting with MP7201-, MP7202-, MP7203-, MP7204-) do not support Third Party Scale configurations.