1. MP72 Scanner Scale Integrator Guide
  2. Scale Calibration
  3. Calibrating the Scale
  4. Calibration at NO LOAD
  • MP72 Scanner Scale Integrator Guide
Calibration at NO LOAD

Calibration at NO LOAD

Begin scale calibration upon successful entry into Calibration Mode.
Complete this calibration step within 30 seconds, or the calibration procedure exits.
Upon successful entry into Calibration Mode, the Scale Display blinks between CAL00 and CAL _ _, and the 7-segment display scrolls C00Lb, or C00g.
  1. Ensure the platter is installed and there is no weighted load on it.
  2. Touch the Scale Zero button on the front panel.
  3. If Calibration at NO WEIGHTED LOAD is successful, continue to Calibration at LOAD.
    If Calibration at NO WEIGHTED LOAD is not successful, see Calibration Failure.