Parameter | ICL | Fujitsu | Wincor-Nixdorf Mode A | Wincor-Nixdorf Mode B/OPOS/JPOS |
|---|---|---|---|---|
Baud Rate | 9600 | 9600 | 9600 | 9600 |
Parity | Even | None | Odd | Odd |
Stop Bit Select | One | One | One | One |
ASCII Format | 8-Bit | 8-Bit | 8-Bit | 8-Bit |
Hardware Handshaking | RTS/CTS Option 3 | None | RTS/CTS Option 3 | RTS/CTS Option 3 |
Software Handshaking | None | None | None | None |
Serial Response Timeout | 9.9 Sec. | 2 Sec. | None | None |
RTS Line State | High | Low | Low | Low = No data to send |
Beep On <BEL> | Disable | Disable | Disable | Disable |
Transmit Code ID | Yes | Yes | Yes | Yes |
Data Transmission Format | Data/Suffix | Data/Suffix | Data/Suffix | Data/Suffix |
Prefix | None | None | None | None |
Suffix | CR (1013) | CR (1013) | CR (1013) | CR (1013) |
Parameter | Olivetti | Omron | CUTE | NCR (Single Cable Scale) | Datalogic |
|---|---|---|---|---|---|
Baud Rate | 9600 | 9600 | 9600 | 9600 | 9600 |
Parity | Even | None | Even | Odd | Odd |
Stop Bit Select | One | One | One | One | One |
ASCII Format | 7-Bit | 8-Bit | 7-Bit | 7-Bit | 7-Bit |
Hardware Handshaking | None | None | None | None | None |
Software Handshaking | ACK/NAK | None | None | None | None |
Serial Response Timeout | 9.9 Sec. | 9.9 Sec. | 9.9 Sec. | 9.9 Sec. | 9.9 Sec. |
RTS Line State | Low | High | High | High | High |
Beep On <BEL> | Disable | Disable | Disable | Disable | Enable |
Transmit Code ID | Yes | Yes | Yes | Yes | Yes |
Data Transmission Format | Prefix/Data/Suffix | Data/Suffix | Prefix/Data/Suffix | Prefix/Data/Suffix * | Data/Suffix |
Prefix | STX (1002) | None | STX (1002) | STX * | None |
Suffix | ETX (1003) | CR (1013) | CR (1013)
ETX (1003) | ETX * | CR (1013) |
