Unpack all components and ensure all parts are present. The MP72 Scanner Scale Box Contents table lists the material in each box. Each item is contained in a separate package within the box. Power cables, host communications cables, and the trim filler are sold separately in kits.
MP72 Scanner Scale Box Contents
Description
Part Number
MP72 w/o Platter
MP720X-XXXXX000XX
Platter
N/A
Leveling Screws
MX301-SR00004ZZWR (leveling screws are included in short and medium configurations)
Regulatory Guide
MN-004907-xx
An optional Scale Display is available separately for scale models only.
For protection during shipment, the MP72 platter is covered with a tight fitting layer of plastic. Remove this before placing the unit into service. For a scale model, remove this just before scale calibration, and for a non-scale model, as the final installation step.
Do not use a sharp object to remove the protector. Doing so can damage the platter.
Keep the packing (it is the approved shipping container, and should be used if the MP72 needs to be returned for servicing), or dispose of the packing in an environmentally sensitive manner.
