This section describes how to configure the MP72 using a USB flash drive.
To manually stage/configure MP72 devices using a USB flash drive:
Generate the staging files and load them onto a USB flash drive.
Deploy the USB flash drive to transport the staging files to an MP72.
Load the files and configure the MP72 by inserting the staging flash drive.
The MP72 has three USB ports which can be used to load files:
Two external ports under the device.
One internal port accessible by removing the platter. This port faces left and includes a cap which must be replaced when the drive is not in use. If the cap is missing or placed incorrectly, the platter cannot sit properly.
See Approved USB Flash Drives for the recommended flash drive dimensions for use in the internal USB port.
