To select a USB device type, scan one of the barcodes in this section.
When changing USB device types, the MP72 automatically resets and issues the standard startup beep sequences.
Before scanning CDC COM Port Emulation, install the appropriate USB CDC driver on the host to ensure the scanner does not stall during power up (due to a failure to enumerate USB). Go to zebra.com/support,
Support & Downloads
>
Barcode Scanners
>
USB CDC Driver
, select the appropriate Windows platform, and download either
Zebra_CDC_ACM_Driver_(x64)v2.15.0004.exe
(64 bit) or
Zebra_CDC_ACM_Driver(x86)_v2.15.0004.exe
(32 bit).
For all MP72 programming barcodes, refer to the MP72 Scanner Scale Barcode Programming Guide.
To recover a stalled scanner, install the USB CDC driver; or unplug the USB cable (at the MP72 side), apply power, and scan
IBM Table-top USB
or any other non-USB CDC host.
IBM Table-top USB
IBM Hand-held USB
IBM OPOS (IBM Hand-held USB with Full Scan Disable)
USB HID Keyboard
When the HID Keyboard host is selected while the MP72 has auxiliary scanners connected, use ADF rules to program the auxiliary scanners to add a 500 ms pause to the end of the data to prevent barcode data interleaving from multiple scanners. This functions with standard RS-232 and SSI over RS-232 (with the Send Raw Decode Data setting).
USB CDC Host
Symbol Native API (SNAPI) with Imaging Interface
Symbol Native API (SNAPI) without Imaging Interface
