1. MP72 Scanner Scale Integrator Guide
  2. Programming
  3. USB Staging Flash Drive
  4. MP72 Menu Structure for the USB Staging Flash Drive
  • MP72 Scanner Scale Integrator Guide
MP72 Menu Structure for the USB Staging Flash Drive

MP72 Menu Structure for the USB Staging Flash Drive

This section addresses the various uses for the USB flash drive.
  • Option 1 - Copy an MP72
    1
     configuration to the USB flash drive.
    • Copy parameter settings and firmware from the MP72
      1
       to the USB flash drive for cloning to another device or viewing in 123Scan.
    • When Option 1 is available, the 7-segment display shows a 1 and one beep sounds.
  • Option 2 - Load a USB flash drive configuration to the MP72
    1
    .
    • Load the parameter settings and firmware (if present) from the staging USB flash drive to this MP72
      1
      .
      The MP72 system configuration settings and firmware are overwritten.
    • When Option 2 is available, the 7-segment display shows a 2 and two beeps sound.
  • Option 3 - Copy statistics, usage, and diagnostics data to the USB flash drive.
    • Copy data from the MP72 onto the USB flash drive (the data can be viewed in 123Scan).
    • When Option 3 is available, the 7-segment display shows a 3 and three beeps sound.
  • Exit without doing anything - Remove the USB flash drive from the MP72.
1
 Auxiliary device settings are copied/loaded if applicable. Auxiliary scanners are currently not supported.
See Loading Cloning Files for the process steps.