1. MP72 Scanner Scale Integrator Guide
  2. Site Preparation and Installation
  3. Installing Components
  4. Installing the Customer Facing Scanner
  5. Installing the CFS Bracket
  6. Long (Flanged) Configuration
  • MP72 Scanner Scale Integrator Guide
Long (Flanged) Configuration

Long (Flanged) Configuration

This section describes how to install the CFS bracket on the long MP72 configuration.
  1. Remove the two T20 screws from the MP72 flange.
  2. Secure the CFS bracket (2) to the flange (1) using the two T20 flange screws. Torque screws to 1.36 Nm +/- 0.03 (12 in-lb +/- 0.25).