1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL Wireless Commands
  3. ^WR - Set Transmit
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^WR - Set Transmit

^WR - Set Transmit

Use this command to change the transmission rate for 802.11b wireless print servers.

Set Transmit Rate

Format:
^WRa,b,c,d,e
Parameters
Details
a
 = rate 1
Sets the 1 Mb/s transmit rate.Y (On), N (Off)
b
 = rate 2
Sets the 2 Mb/s transmit rate.Y (On), N (Off)
c
 = rate 5.5
Sets the 5.5 Mb/s transmit rate.Y (On), N (Off)
d
 = rate 11
Sets the 11 Mb/s transmit rate.Y (On), N (Off)
e
 = transmit power
1, 5, 20, 30, 50, 100
This command is not valid for Link-OS printers and is only supported in selected other models.