1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. internal_wired.ip.protocol
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
internal_wired.ip.protocol

internal_wired.ip.protocol

This command configures the IP addressing method used by the internal wired print server.

Setvar

To instruct the printer to configure the IP addressing method used by the internal wired print server:
! U1 setvar "internal_wired.ip.protocol" "value"
Values
  • "bootp"
     uses the standard bootp addressing method to obtain an IP address and configuration
  • "dhcp"
     uses the standard dhcp addressing method to obtain an IP address and configuration for a server specified period of time
  • "rarp"
     uses the standard rarp addressing method to obtain an IP address
  • "glean"
     uses the IP address from a PING packet that is sent to its hardware address (unicast address)
  • "permanent"
     uses static values assigned through other commands
  • "all" =
     tries all of the dynamic addressing methods, not permanent, to obtain an IP address
Default
"all"

Getvar

To return the IP addressing method used by the internal wired print server:
! U1 getvar "internal_wired.ip.protocol"
Example
In this example, the
setvar
 result is the current programming language that the printer is using. 
! U1 setvar "internal_wired.ip.protocol" "bootp"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"bootp"
.