1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. external_wired.ip.timeout.value
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
external_wired.ip.timeout.value

external_wired.ip.timeout.value

This network setting refers to the number of seconds before the connection times out for the external wired print server.

Setvar

To instructs the printer to set the time of the external wired print server, in seconds, before the connection times out:
! U1 setvar "external_wired.ip.timeout.value" "value"
Values
"1"
 through
"3600"
Default
"300"

Getvar

To instruct the printer to respond with the time of the external wired print server, in seconds, before the connection times out:
! U1 getvar "external_wired.ip.timeout.value"
On SEH print server models PS102-Z or the PS105-Z, only the getvar command is supported.
Example
This
setvar
 example shows the value set to
"300"
. 
! U1 setvar "external_wired.ip.timeout.value" "300"
When the
setvar
 value is set to
"300"
, the
getvar
 result is
"300"
.