1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. device.light.cover_open_brightness
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
device.light.cover_open_brightness

device.light.cover_open_brightness

This command sets the brightness level for the Cover Open light.

Setvar

To set the brightness level for the cover open LEDs:
! U1 setvar "device.light.cover_open_brightness" "value"
Values
  • "high"
     the LEDs display at maximum brightness when the cover is open
  • "medium"
     the LEDs display at medium brightness when the cover is open
  • "low"
     the LEDs display at lowest brightness when the cover is open
  • "off"
     the LEDs remain off at all times
Default
"high"

Getvar

To retrieve the current brightness level setting for the cover open LEDs:
! U1 getvar "device.light.cover_open_brightness"
Example
This
setvar
 example shows the value set to
"low"
. 
! U1 setvar "device.light.cover_open_brightness" "low"