1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. device.print_reprogram_2key
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
device.print_reprogram_2key

device.print_reprogram_2key

This command determines whether the printer will print a configuration label or 2key report after the printer restarts following a firmware update.
When set to
"off"
 the printer will not print the configuration label or 2key report after the printer is updated.

Setvar

To set whether a two-key report is printed or not:
! U1 setvar "device.print_reprogram_2key" "value"
Values
  • "on"
  • "off"
Default
"off"

Getvar

To retrieve the current setting for processing two-key report after printer firmware is reprogrammed:
! U1 getvar "device.print_reprogram_2key"
Example
This example disables printing of the two-key report after printer firmware is reprogrammed.
! U1 setvar "device.print_reprogram_2key" "off"