1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.addr
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.addr

wlan.ip.addr

This command allows you to get or set the wireless print servers IP address.
For a set IP address to take affect, the IP protocol must be set to permanent and the print server must be reset.

Setvar

To instruct the printer to change its current wireless print server IP address upon powering the printer on:
! U1 setvar "wlan.ip.addr" "value"
Values
Any valid IP address
Default
"0.0.0.0"

Getvar

To respond with the current wireless print server IP address:
! U1 getvar "wlan.ip.addr"
Example
This
setvar
example shows the value set to
"10.14.4.235"
.
! U1 setvar "wlan.ip.addr" "10.14.4.235"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"10.14.4.235"
.