1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. internal_wired.ip.timeout.value
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
internal_wired.ip.timeout.value

internal_wired.ip.timeout.value

This network setting refers to the number of seconds before the connection times out for the internal wired print server. For this to take effect, the print server must be reset.

Setvar

To instruct the printer to set the time of the internal wired print server, in seconds, before the connection times out:
! U1 setvar "internal_wired.ip.timeout.value" "value"
Values
"1"
 through
"3600"
Default
"300"

Getvar

To instruct the printer to respond with the time of the internal wired print server, in seconds, before the connection times out:
! U1 getvar "internal_wired.ip.timeout.value"
Example
This
setvar
 example shows the value set to
"300"
. 
! U1 setvar "internal_wired.ip.timeout.value" "300"
When the
setvar
 value is set to
"300"
, the
getvar
 result is
"300"
.