1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.pop3.password
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.pop3.password

ip.pop3.password

This printer setting refers to the POP3 mailbox password. This only applies if "
ip.pop3.enable
" is set to on.

Setvar

To change the POP3 password:
! U1 setvar "ip.pop3.password" "value"
Values
A maximum of 20 alphanumeric characters
Default
" "

Getvar

To respond with the POP3 password:
! U1 getvar "ip.pop3.password"
For protection a single
"*"
prints.
Example
This
setvar
example shows the value set to
"password"
. 
! U1 setvar "ip.pop3.password" "password"
When the
setvar
 value is set to
"password"
, the
getvar
 result is
"*"
.