1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.port_alternate
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.port_alternate

wlan.ip.port_alternate

This command sets the port number of the alternate wlan port.
Print servers supporting this command will monitor both the primary port and the alternate port for connections at the same time.

Setvar

To set the alternate wlan port for the print server:
! U1 setvar "wlan.ip.port_alternate" "6101"
Values
Any valid TCP port address
Default
"9100"

Getvar

To return the current alternate wlan port setting:
! U1 getvar "wlan.ip.port_alternate"
Values
The current port setting.
Example 1
This
setvar
 example shows the value set to
"6101"
. 
U1 setvar "wlan.ip.port_alternate" "6101"
Example 2
This setvar example sets the channel mask to use only channels 1,6,11. 
! U1 setvar "wlan.channel_mask" "0x421"
Only channels 1, 6, and 11 will be used by the radio.