1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. ip.firewall.proxy
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.firewall.proxy

ip.firewall.proxy

Use this command when a printer must go through a proxy server before making an outgoing HTTP/HTTPS connection. This setting is not connection specific and acts as a general value.

Setvar

To specify a proxy server:
! U1 setvar "ip.firewall.proxy" "[http|https]://[user:password@]host[:port][/path]"
Values
  • HTTP
     or
    HTTPS
     is a required value.
  • user:password
     is an optional value.
  • host
     is a required value. DNS or IP address is acceptable.
  • :port
     is an optional value
  • /path
     is an optional value.
The maximum length of the string is 2048 characters.

Getvar

To have the printer return the value of the proxy server setting:
 U1 getvar "ip.firewall.proxy"
If the proxy value includes a
user:password
, the are replaced with a
*
.
The maximum length of the string is 2048 characters.