1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. Introduction
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
Introduction

Introduction

This guide is the unabridged, alphabetical reference of programming commands supported in the firmware. This includes all ZPL commands and SGD commands.
These are important points to note when using ZPL and SGD commands:
  • ZPL and SGD commands should be sent to the printer as separate files.
  • Certain settings can be controlled by both ZPL and SGD. Configuration changes made in ZPL can affect configuration changes made in SGD.
To contact Zebra or for technical support, visit www.zebra.com/contact.