1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.port_json_config
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.port_json_config

wlan.ip.port_json_config

This command determines the TCP port number to listen on for JSON configuration packets.

Setvar

To determine the TCP port number on which to listen for JSON configuration packets:
! U1 setvar "wlan.ip.port_json_config" "value"
Values
"0"
 disables the port
"1"
 through
"65535"
 for port number to listen on
Default
"9200"

Getvar

To retrieve the TCP port number which is listening for JSON configuration packets:
! U1 getvar "wlan.ip.port_json_config"
Example
In this example, the
getvar
 command causes the printer to get the TCP port number which is listening for JSON configuration packets.
! U1 getvar "wlan.ip.port_json_config"
In this example, the
getvar
 command causes the printer to get the TCP port number which is listening for JSON configuration packets.
! U1 getvar "wlan.ip.port_json_config"