1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. external_wired.ip.dhcp.cid_suffix
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
external_wired.ip.dhcp.cid_suffix

external_wired.ip.dhcp.cid_suffix

This printer setting defines the unique suffix to be used as the client identifier (DHCP option 61) if DHCP is enabled repeated on the external wired print server and
external_wired.ip.dhcp.cid_type on page 1077
 is set to
"0"
 or
"2"
, not
"1"
.

Setvar

To instruct the printer to change the client identifier suffix value:
! U1 setvar "external_wired.ip.dhcp.cid_suffix" "value"
Values
The maximum length of a value allowed is 60 ASCII characters when the CID type is ASCII, or 120 hexadecimal values when the CID type is hexadecimal.
Default
""

Getvar

To instruct the printer to respond with the client identifier suffix on the external wired print server:
! U1 getvar "external_wired.ip.dhcp.cid_suffix"
On SEH print server models PS102-Z or the PS105-Z, only the getvar command is supported.
Example
This
setvar
 example shows setting the suffix to
"printer"
. 
! U1 setvar "external_wired.ip.dhcp.cid_suffix" "printer"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"printer"
.