1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. internal_wired.ip.dhcp.cid_enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
internal_wired.ip.dhcp.cid_enable

internal_wired.ip.dhcp.cid_enable

This command determines if DHCP (option 61) is turned on or off of the internal wired print server.

Setvar

To instruct the printer to set the status of the client identifier of the internal wired print server:
! U1 setvar "internal_wired.ip.dhcp.cid_enable" "value"
Values
  • "off"
     client identifier is turned off
  • "on"
     client identifier is turned on
Default
"off"

Getvar

To instruct the printer to respond with the status of the client identifier of the internal wired print server:
! U1 getvar "internal_wired.ip.dhcp.cid_enable"
Example
This
setvar
 example shows the value set to
"off"
. 
! U1 setvar "internal_wired.ip.dhcp.cid_enable" "off"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"off"
.