1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. sensor.self_adjusting_enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
sensor.self_adjusting_enable

sensor.self_adjusting_enable

Enables the self-adjusting gap sensor.

Setvar

To enable the self-adjusting gap sensor:
! U1 setvar "sensor.self_adjusting_enable" "value"
Values
  • "yes"
     enables the self-adjusting gap sensor and disables the traditional gap sensor
  • "no"
     disables the self-adjusting gap sensor and enables the traditional gap sensor

Getvar

To retrieve the self-adjusting gap sensor:
! U1 getvar "sensor.self_adjusting_enable"
Example
This
setvar
 example shows the value set to
"yes"
. 
! U1 setvar "sensor.self_adjusting_enable" "yes"
The
setvar
 value is the
getvar
 result. In this example, the
getvar
 result is
"yes"
.