1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.protocol
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.protocol

wlan.ip.protocol

This command configures the IP addressing method used by the wireless print server.

Setvar

To configure the IP addressing method used by the wireless print server:
! U1 setvar "wlan.ip.protocol" "value"
Values
  • "bootp"
     uses the standard BOOTP addressing method to obtain an IP address and configuration
  • "dhcp"
     uses the standard DHCP addressing method to obtain an IP address and configuration for a server specified period of time
  • "rarp"
     uses the standard RARP addressing method to obtain an IP address
  • "glean only"
     uses the IP address from a PING packet that is sent to its hardware address (unicast address)
  • “permanent"
     uses static values assigned through other commands
  • "all"
     tries all of the dynamic addressing methods, not permanent, to obtain an IP address
Default
"all"

Getvar

To return the value of the currently selected IP protocol used by the wireless print server:
! U1 getvar "wlan.ip.protocol"
Example
In this example, the
setvar
 result is the current programming language that the printer is using. 
! U1 setvar "wlan.ip.protocol" "bootp"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"bootp"
.