1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.dhcp.option12
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.dhcp.option12

ip.dhcp.option12

This command specifies if the DHCP option 12 (host name) is on or off in the discovery packet that is sent from the wireless print server.

Setvar

To instructs the printer to set the DHCP option 12 (host name) in the discovery packet that is sent from the wireless print server:
! U1 setvar "ip.dhcp.option12" "value"
Values
  • "on"
     turns on option 12
  • "off"
     turns off option 12
Default
"on"

Getvar

To retrieve the status of the DHCP option 12 (host name) in the discovery packet that is sent from the wireless print server:
! U1 getvar "ip.dhcp.option12"
Example
This
setvar
 example shows the value set to
"on"
.
! U1 setvar "ip.dhcp.option12" "on"
When the
setvar
 value is set to
"on"
, the
getvar
 result is
"on"
.