1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. zpl.control_character
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
zpl.control_character

zpl.control_character

This command is used to change the control command prefix. The default prefix is the tilde (~).
This command is equivalent to the
^CT
 and
~CT
 commands.

Setvar

To change the control character:
! U1 setvar "zpl.control_character" "value"
Values
ASCII values for the desired character
"00-FF,00-ff,up,down"
See ASCII for more information.
Default
"7E" (tilde)

Getvar

To return the currently set control character:
! U1 getvar "zpl.control_character"
Example
This example sets the value set to
"+"
. 
! U1 setvar "zpl.control_characater" "2b"