1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. external_wired.ip.dhcp.cid_prefix
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
external_wired.ip.dhcp.cid_prefix

external_wired.ip.dhcp.cid_prefix

This printer setting defines the prefix to be prepended to the DHCP client identifier (option 61) when DHCP is enabled on the external wired print server and
"external_wired.ip.dhcp.cid_type"
 is set to
"0"
 or
"2"
.

Setvar

To instructs the printer to change the CID prefix of the external wired print server:
! U1 setvar "external_wired.ip.dhcp.cid_prefix" "value"
Values
Any text string up to 10 characters if the CID type is ASCII, or 20 characters if the CID type is hexadecimal.
Default
""

Getvar

To instruct the printer to respond with the client identifier prefix of the external wired print server:
! U1 getvar "external_wired.ip.dhcp.cid_prefix"
On SEH print server models PS102-Z or the PS105-Z, only the getvar command is supported.
Example
This
setvar
 example shows the value set to
"PRT001"
. 
! U1 setvar "external_wired.ip.dhcp.cid_prefix" "PRT001"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"PRT001"
.