1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.adhocautomode
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.adhocautomode

wlan.adhocautomode

This printer setting refers to enabling or disabling the adhoc auto mode.

Setvar

To instruct the printer to set the adhoc auto mode:
! U1 setvar "wlan.adhocautomode" "value"
Values
  • "on"
     adhoc auto mode enabled
  • "off"
     adhoc auto mode disabled
Default
"off"

Getvar

To instruct the printer to respond with the adhoc auto mode status:
! U1 getvar "wlan.adhocautomode"
Example
This
setvar
example shows the value set to
"on"
. 
! U1 setvar "wlan.adhocautomode" "on"
When the
setvar
 value is set to
"on"
, the
getvar
 result is
"on"
.