1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZBI Commands
  3. DELBREAK
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
DELBREAK

DELBREAK

This command allows you to remove existing breakpoints.
Format
DELBREAK <A>
Parameters
A
 = the line number from which to remove the break. If 0 is specified, all break points will be removed. If the number specified is not a breakpoint, the command will have no effect.
Example
An example of the DELBREAK command: 
10 LET A=5 
20 PRINT A 
ADDBREAK 20 
DEBUG ON 
TRACE ON 
RUN 
<TRACE> 10 
<TRACE> A=5 
<PROGRAM BREAK> ON LINE:20 
 
RESTART 
<TRACE> 20 
5 
 
DELBREAK 20 
RUN 
<TRACE> 10 
<TRACE> A=5 
<TRACE> 20 
5
Comments
This command is available only when the DEBUG function has been activated. When DEBUG is on, BREAK halts processing, RUN starts the program from the beginning, and RESTART allows the program to continue where it left off.
This is the command used internally by ZBI-Developer when the user right-clicks over a program line and removes a Breakpoint via the "Toggle Breakpoint" selection.
A maximum of 16 breakpoints can be set in an application.
This is an interactive command that takes effect as soon as it is received by the printer.