1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZBI Commands
  3. AUXPORT_GETPIN
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
AUXPORT_GETPIN

AUXPORT_GETPIN

This function will retrieve the state of the applicator pin.
Format
AUXPORT_GETPIN
(X)
Parameters
X
 = perform action on this applicator port pin.
Returns
This function returns 1 if pin is in high state, 0 in low state, and -1 upon failure.
Example
Comments
If this pin is not controlled via ZBI (power pin), this function will return -1. See AUXPORT_STEALPIN.