1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.dhcp.session_interval
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.dhcp.session_interval

ip.dhcp.session_interval

This command configures the time interval (in seconds) before a new DHCP session is started on the wireless print server.

Setvar

To set the DHCP session time out value (in seconds):
! U1 setvar "ip.dhcp.session_interval" "value"
Values
"0"
 through
"60"
Default
"10"

Getvar

To retrieve the current DHCP session time out value (in seconds):
! U1 getvar "ip.dhcp.session_interval"
Example
This
setvar
 example shows the value set to
"10"
. 
! U1 setvar "ip.dhcp.session_interval" "10"
When the
setvar
 value is set to
"10"
, the
getvar
 result is
"10"
.