1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.dhcp.cid_all
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.dhcp.cid_all

wlan.ip.dhcp.cid_all

This printer setting defines the entire client identifier (DHCP option 61) if DHCP is enabled on the wireless print server and
"wlan.ip.dhcp.cid_type"
 is set to
"0"
, or
"2"
. The MAC address is used if the type is set to
"1"
.

Setvar

To change the client identifer prefix and suffix of the wireless print server:
! U1 setvar "wlan.ip.dhcp.cid_all" "value"
Values
A maximum length of 60 characters if the CID type is ASCII, or 120 characters if the CID type is hexadecimal.
Default
""

Getvar

To instruct the printer to respond with the client identifier prefix and suffix of the wireless print server:
! U1 getvar "wlan.ip.dhcp.cid_all"
Example
This
setvar
example shows the value set to
"printer"
. 
! U1 setvar "wlan.ip.dhcp.cid_all" "printer"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"printer"
.