1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. weblink.ip.conn[1|2].maximum_simultaneous_connections
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
weblink.ip.conn[1|2].maximum_simultaneous_connections

weblink.ip.conn[1|2].maximum_simultaneous_connections

This command indicates the maximum number of simultaneous connections that can be initiated by the printer.
Via the main connection (the original connection initiated by the printer to the remote server), the remote server can request that additional connetions from the printer be initated (e.g. a connection that supports only JSON SGDs, one that behaves similar to the RAW TCP port.
The server is free to request as many as it thinks it needs, but the printer will prevent more than N number of connections, where N is the value of this command.
^JUF, ^JUS, ^JUN, ^JUA
, and
device.restore_defaults
 do not have any affect on this setting.

Setvar

To set the maximum number of connections:
! U1 setvar "weblink.ip.conn1.maximum_simultaneous_connections" "value"
! U1 setvar "weblink.ip.conn2.maximum_simultaneous_connections" "value"
Values
Any integer from 1-100
Default
"10"

Getvar

To retrieve the maximum set number of connections:
! U1 getvar "weblink.ip.conn1.maximum_simultaneous_connections"
! U1 getvar "weblink.ip.conn2.maximum_simultaneous_connections"
Example
This example sets the conn1 maximum connections to 3.
! U1 setvar "weblink.ip.conn1.maximum_simultaneous_connections" "3"