1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. internal_wired.ip.netmask
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
internal_wired.ip.netmask

internal_wired.ip.netmask

This setting refers to the internal wired print server’s subnet mask address. This value is ignored if the IP protocol is not set to permanent.

Setvar

To instruct the printer to change the internal wired print servers subnet mask:
! U1 setvar "internal_wired.ip.netmask" "value"
Values
Any valid subnet mask.
Default
"255.255.255.0"

Getvar

To instruct the printer to respond with internal wired print servers subnet mask:
! U1 getvar "internal_wired.ip.netmask"
Example
This
setvar
 example shows the value set to
"255.255.255.0"
. 
! U1 setvar "internal_wired.ip.netmask" "255.255.255.0"
When the
setvar
 value is set to
"255.255.255.0"
, the
getvar
 result is
"255.255.255.0"
.