1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. cutter.clean_cutter
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
cutter.clean_cutter

cutter.clean_cutter

This command determines if the clean cutter option is enabled or disabled.

Setvar

To instruct the printer to set the clean cutter option:
! U1 setvar "cutter.clean_cutter"
Values
  • "on"
     turns on clean cutter
  • "off"
     turns off clean cutter
Default
"on"

Getvar

To retrieve the status of the clean cutter option:
! U1 getvar "cutter.clean_cutter"
Example
This
setvar
 example shows the value set to
"on"
. 
! U1 setvar "cutter.clean_cutter" "on"
When the setvar value is set to
"on"
, the
getvar
 result is
"on"
.