1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. media.present.length_addition
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
media.present.length_addition

media.present.length_addition

This printer setting adds an additional amount to how far the paper is ejected during a present cycle. A standard amount of 50mm is always added to clear the kiosk wall. This amount is added to that 50mm. The total amount of media ejected this command is executed, then, is 50mm + media.present.length_addition + media.present.eject.

Setvar

This command instructs the printer to change the media present length addition. 
! U1 setvar "media.present.length_addition" "value"
Values
"0"
 to
"255"
 specifies the additional mm of media to eject

Getvar

This command instructs the printer to respond with the currently set media present length addition.
! U1 getvar "media.present.length_addition"