1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL Commands
  3. ~RO
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
~RO

~RO

The
~RO
 command resets the advanced counters used by the printer to monitor label generation in inches, centimeters, and number of labels.

Reset Advanced Counters

Format:
~ROc
Parameters
Details
c =
 counter number
Values:
1
 = reset counter 1
2
 = reset counter 2
3
 = reset valid RFID label counter
4
 = reset voided RFID label counter
C =
 reset head cleaned counter
1
R =
 reset head replaced counter and head cleaned counter
1
Default:
 a value must be specified or the command is ignored
1. These values are supported only on Xi4, RXi4, ZM400/ZM600, RZ400/RZ600, S4M, and G-Series printers.
This example shows how the counter portion of the printer configuration labels looks when counter 1 is reset by sending
~RO1
.
Example:
This example shows how the counter portion of the printer configuration labels looks when the RFID counters are reset by sending
~RO3
 and
~RO4
.