1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD RFID Commands
  3. rfid.reader_1.power.single_power
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
rfid.reader_1.power.single_power

rfid.reader_1.power.single_power

This command sets the RFID reader power level for reading and writing to RFID tags for readers with a single power level.
This command applies only to the R110Xi HF printer, firmware version R65.X.

Setvar

To set the power level for reading and writing:
! U1 setvar "rfid.reader_1.power.single_power" "value"
Values
  • "high"
  • "medium"
  • "low"
Default
"low"

Getvar

To respond with the current power level:
! U1 getvar "rfid.reader_1.power.single_power"
This
setvar
 example sets the antenna to high power for writing to RFID tags.
Example
! U1 setvar "rfid.reader_1.power.single_power" "high"
When the
setvar
 value is set to
"high"
, the
getvar
 result is
"high"
.