1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. internal_wired.ip.timeout.enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
internal_wired.ip.timeout.enable

internal_wired.ip.timeout.enable

This network setting refers to enabling the connection timeout on the internal wired print server. For this to take effect, the print server must be reset.

Setvar

To instruct the printer to enable or disable the timeout checking on the internal wired print server:
! U1 setvar "internal_wired.ip.timeout.enable" "value"
Values
  • "off"
     turns off the connection checking
  • "on"
     turns on the connection checking
Default
"on"

Getvar

To instruct the printer to return whether the timeout checking is enabled on the internal wired print server:
! U1 getvar "internal_wired.ip.timeout.enable"
Example
This
setvar
 example shows the value set to
"on"
. 
! U1 setvar "internal_wired.ip.timeout.enable" "on"
When the
setvar
 value is set to
"on"
, the
getvar
 result is
"on"
.