1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.mirror.auto
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.mirror.auto

ip.mirror.auto

This command enables the ability to automatically perform a mirror update (fetch) command on power up.

Setvar

To perform a mirror update (fetch) command when the printer is turned on using the interval that is set for
"ip.mirror.freq"
 or
"ip.mirror.freq_hours":
! U1 setvar "ip.mirror.auto" "values"
Values
  • "on"
     turns on the auto mirroring feature
  • "off"
     turns off the auto mirroring feature
Default
"off"

Getvar

To report whether the printer will perform a mirror update (fetch) automatically on power up:
! U1 getvar "ip.mirror.auto"
Example
This
setvar
 example shows the value set to
"off"
.
! U1 setvar "ip.mirror.auto" "off"
When the
setvar
 value is set to
"off"
, the
getvar
 result is
"off"
.