1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Command Reference
  3. device.command_override.active
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
device.command_override.active

device.command_override.active

This command enables or disables the
device.command_override
 function. When enabled, the printer will ignore the list of commands previously specified using the
device.command_override.add
. Use of this command does not modify the list of commands to be overridden.
This setting is not defaulted as part of a factory default (
^JUF
 or
^default
). The setting is persistent across a power cycle or rest (
~JR
 or
device.reset
).

Setvar

To turn on/off the
device.command_override
 function:
! U1 setvar "device.command_override.active" "value"
Values
  • "yes"
     = active
  • "no"
     = inactive
Default
"yes"

Getvar

To return the active/inactive state of
device.command_override
command:
! U1 getvar "device.command_override.active"
Result
  • "yes"
     the command is active
  • "no"
     the command is inactive
Example
! U1 setvar "device.command_override.active" "yes"
! U1 setvar "device.command_override.active" "no"