1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL Commands
  3. ~WC
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
~WC

~WC

The
~WC
 command is used to generate a printer configuration label. The printer configuration label contains information about the printer setup, such as sensor type, network ID, ZPL mode, firmware version, and descriptive data on the
R:
,
E:
,
B:
, and
A:
 devices.

Print Configuration Label

Format:
~WC
Comments:
 This command works only when the printer is idle.