1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wired Commands
  3. internal_wired.ip.dhcp.arp_verify
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
internal_wired.ip.dhcp.arp_verify

internal_wired.ip.dhcp.arp_verify

This command controls whether the internal wired print server will send an ARP response after receiving an IP address via DHCP.

Setvar

To control whether the internal wired print server will send an ARP response after receiving an IP address via DHCP:
! U1 setvar "internal_wired.ip.dhcp.arp_verify" "value"
Values
"off"
 ARP response will not be sent.
"on"
 ARP response will be sent.
Default
"off"
 for mobile Link-OS printers
"on"
 for desktop and industrial printers

Getvar

To return the current setting value:
! U1 getvar "internal_wired.ip.dhcp.arp_verify"