1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.roam.neighbor_assist
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.roam.neighbor_assist

wlan.roam.neighbor_assist

This command supports 802.11k roaming. When enabled and connected to a network, the printer will query the neighbor list from the Access Point (AP) and use the neighbor AP channel list to reduce the number of channels needed to scan during roaming attempts.

Setvar

To enable
wlan.roam.neighbor_assist
:
! U1 setvar "wlan.roam.neighbor_assist" "on"
Values
  • on
     enables the neighbor query.
  • off
     disables the neighbor query.
Default
off

Getvar

To return the value of
wlan.roam.neighbor_assist
:
! U1 getvar "wlan.roam.neighbor_assist " "on"
Values
  • on
     the neighbor query is enabled.
  • off
     the neighbor query is disabled.