1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. wlan.ip.netmask
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ip.netmask

wlan.ip.netmask

This setting refers to the wireless print server’s subnet mask address. This value is ignored if the IP protocol is not set to permanent.

Setvar

To change the wireless print servers subnet mask:
! U1 setvar "wlan.ip.netmask" "value"
Values
Any valid subnet mask.
Default
"255.255.255.0"

Getvar

To return the current setting value:
! U1 getvar "wlan.ip.netmask"
Example
This
setvar
 example shows the value set to
"255.255.255.0"
. 
! U1 setvar "wlan.ip.netmask" "255.255.255.0"
When the
setvar
 value is set to
"255.255.255.0"
, the
getvar
 result is
"255.255.255.0"